1. Introduction
With the popularity of gashapon machines in recent years, many people have begun to understand and buy this entertainment equipment. However, the assembly of the gashapon machine may be a little difficult for novices. The assembly steps of the gashapon machine will be introduced in detail, hoping to help everyone successfully assemble their own gashapon machine.
2. Parts list
Before assembling the gashapon machine, you need to list the parts list and check whether it is complete. Usually includes: host, gripper, gashapon plate, key, currency device, etc.
3. Assembly steps
Insert the gashapon plate into the bottom of the host, paying attention to the direction.
Hang the gripper, and pay attention to the connection between the gripper and the host.
Connect the currency device to the host.
Finally, use the key to lock the currency device and adjust the gripper strength and sensitivity.
4. Precautions
Before assembly, be sure to carefully check the instructions and remove all accessories.
During the assembly process, be gentle to avoid damage to the parts during disassembly or installation.
Before assembly, prepare tools such as screwdrivers, rubber hammers, wrenches, etc. Pay attention to safety during the assembly process, especially when connecting the power supply, be sure to disconnect the power supply and ask a professional to connect it.
5. Solutions to common problems
The gripper is not sensitive: you need to adjust the strength and sensitivity of the gripper, or check whether the gripper is firmly connected.
The gashapon machine cannot be turned on: check whether the power is turned on and the key is inserted.
The gashapon does not come out: there may be a problem with the currency device, and you need to check whether the currency device is working properly.
In short, the assembly of the gashapon machine requires patience and carefulness. I believe that as long as you follow the above steps, anyone can successfully assemble a gashapon machine of their own. If there is any problem, you can check the instructions and consult after-sales service during the assembly process, and they will be happy to solve the problem for you.
